Cf_Delayctrl Command; Cf_Testpat Command; Cf_Fdefault Command - Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications

8.9.63 CF_DELAYCTRL Command

Command "CF_DELAYCTRL_%1" [CR]
"OFF"---------- Set Video delay control to OFF
"LOW"---------- Set Video delay control to LOW
%1
"MID"---------- Set Video delay control to MID
"HIGH"---------- Set Video delay control to HIGH
Select the mode of Video delay control
(Valid only when in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.9.64 CF_TESTPAT Command

Command "CF_TESTPAT_%1" [CR]
"COLOR" ---------------------- Display Color bar
"GRAD1" ---------------------- Display 16step(white→black)
"GRAD2" ---------------------- Display 16step(white←black)
"GRAD3" ---------------------- Display 16step(white↓black)
%1 "GRAD4" ---------------------- Display 16step(white↑black)
"WHITE" ---------------------- Display all white
"BLACK" ---------------------- Display all black
"CROSS" --------------------- Display Cross
"OFF" ---------------------Do not show test pattern display
Execute test pattern display.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable

8.9.65 CF_FDEFAULT Command

Command "CF_FDEFAULT_%1" [CR]
%1 "RST"
Reset to Factory Default setting
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
56/94