Cr_ Kystnmode Command; Cr_Cornertestpat Command; Cr_Ceil Command; Cr_Rear Command - Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
9.8.6

CR_ KYSTNMODE Command

Command "CR_KYSTNMODE" [CR]
Details Get setting status of Keystone Store Mode
Acceptable
Response
%1
Unacceptable
9.8.7

CR_CORNERTESTPAT Command

Command "CR_CORNERTESTPAT" [CR]
Details Get setting status of test pattern for Corner correction
Acceptable
Response
%1
Unacceptable
9.8.8

CR_CEIL Command

Command "CR_CEIL" [CR]
Details Get setting status of Ceiling
Acceptable
Response
%1
Unacceptable
9.8.9

CR_REAR Command

Command "CR_REAR" [CR]
Details Get setting status of Rear function
Acceptable
Response
%1
Unacceptable
9.8.10

CR_SCREENASPECT Command

Command "CR_SCREENASPECT"[CR]
Details Get status of Screen aspect
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"STR" ---------------------- Store mode is "Store"
"RST" ---------------------- Store mode is "Reset"
"?" [CR] -------------------- When unknown command is received
"000_%1" [CR]
"RED" ---------------------------- Test pattern is red
"WHITE" ------------------------- Test pattern is white
"BLUE" --------------------------- Test pattern is blue
"OFF" ------------------------- Test pattern is not displayed
"Error Code" [CR]
"000_%1" [CR]
"ON" --------------------------- Ceiling projection is enabled
"OFF" ------------------------- Ceiling projection is disabled
"Error Code" [CR]
"000_%1" [CR]
"ON" --------------------------- Rear projection is enabled
"OFF" ------------------------- Rear projection is disabled
"Error Code" [CR]
"000_%1"[CR]
"43MODE" ･･･････ Select 4：3 mode
"169MODE" ･･････ Select 16：9 mode
"1610MODE" ･･････ Select 16：10 mode
"Error code"[CR]
76/94