Input Control Command; Cf_Input Command - Sanyo PLC-WU3800 Manual

PLC-WU3800 Expand Serial Command Functional Specifications
8.6

Input Control Command

8.6.1

CF_INPUT Command

Command "CF_INPUT_%1"[CR]
"CONPUTER1" ----- Select Computer1 Input
"COMPUTER2" ----- Select Computer2 Input
"HDMI" ----------------- Select HDMI Input
"VIDEO" --------------- Select Video Input
"S-VIDEO" ------------ Select S-video
"UP" ----------------------- Switch Input setting forward
%1
"DN" ------------------- Switch Input setting backward
Select Input
The same operation as "INPUT" button of the projector and Remote Control.
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
When Computer 2 is selected in Terminal menu:
Computer1 → Computer2 → HDMI → Video →S-video→...
When Monitor out is selected in Terminal menu:
Computer1 →HDMI → Video →S-video→...
When Computer 2 is selected in Terminal menu:
S-video → Video → HDMI → Computer2 →Computer1→....
When Monitor out is selected in Terminal menu:
S-video → Video → HDMI →Computer1→....
"000"[CR]
"Error code"[CR]
25/74