Screen Control Command; Cf_Screen Command; Cf_Dzcent Command - Sanyo PLC-HP7000L Technical Specifications
Expand serial command functional specifications
Hide thumbs
Also See for PLC-HP7000L:
- Service manual (168 pages) ,
- Owner's manual (98 pages) ,
- Specifications (27 pages)
Table of Contents
Advertisement
PLC-HP7000L Expand Serial Command Functional Specifications
8.7 Screen Control Command
8.7.1
CF_SCREEN Command
Command
"CF_SCREEN_%1" [CR]
Input is Computer
%1
Input is Video
Common in AV/PC
Select screen size (Available only in the normal Power ON status)
When selected input does not include specified %1, error code "101" [CR] is
Details
returned and it is not executed.
Receiving "DZOOM_UP" or "DZOOM_DN" command immediately executes the
function.
Acceptable
Response
Unacceptable
8.7.2
CF_DZCENT Command
Command
"CF_DZCENT_%1" [CR]
%1
"CENT" --------------- Cancel Digital Zoom (CENT: "CENTER")
Cancel Digital Zoom (Available only in the normal Power ON status and Input
Details
for Computer is selected)
Release the image setting in case the image is enlarged or reduced.
Acceptable
Response
Unacceptable
"NORMAL" ---------------------- Select Normal mode
"FULL" --------------------------- Select Full screen mode
"WIDE" --------------------------- Select Wide(16:9) mode
"ZOOM" -------------------------- Select Zoom mode
"TRUE" -------------------------- Select True mode
"CUSTOM" ---------------------- Select Custom mode
"DZOOM_UP" ----------------- Scale up with Digital zoom
"DZOOM_DN" ---------------- Scale down with Digital zoom
"UP" ----- The same operation as pressing Up key or Left key
"DN" -----The same operation as pressing Down key or Right
key
"NORMAL" ---------------------- Select Normal mode
"FULL" --------------------------- Select Full screen mode
"WIDE" --------------------------- Select Wide(16:9) mode
"ZOOM" -------------------------- Select Zoom mode
"NATURAL" --------------------- Select Natural wide mode
"CUSTOM" ---------------------- Select Custom mode
"UP" ----- The same operation as pressing Up key or Left key
"DN" -----The same operation as pressing Down key or Right
key
"RST" ---------------------- Reset Screen adjustment
"000" [CR]
"Error Code" [CR]
"000" [CR]
"101" [CR] ----------------- When input is Video
33/94
Advertisement
Table of Contents
