Cf_Blendrst Command; Cf_Blendmenuoff Command; Cf_Blendmenu Command; Cf_Colormatching Command - Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
Acceptable
Response
Unacceptable
8.9.24

CF_BLENDRST Command

Command "CF_BLENDRST_%1" [CR]
%1 "RST" ---------------------- Reset current setting status
Reset current setting status of Edge blending.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.9.25

CF_BLENDMENUOFF Command

Command "CF_BLENDMENUOFF_%1" [CR]
"SET" ----------------------
%1
"RST" ---------------------- Display Edge blending menu and edge line
Set Menu off function of Edge blending.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.9.26

CF_BLENDMENU Command

Command "CF_BLENDMENU_%1" [CR]
"ON" ---------------------- Display Edge blending menu and edge line.
%1
"OFF" --------------------- Set Edge blending menu and edge line undisplayed.
Set Edge blending menu and edge line displayed or undisplayed.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.9.27

CF_COLORMATCHING Command

Command "CF_COLORMATCHING_%1" [CR]
"ON" ---------------------- Set to On
%1
"OFF" -------------------- Set to Off
Set status of Color matching. (Available only in the normal Power ON status)
Details The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.9.28

CMMSXY Command

Command "CF_CMMSXY_%1_%2_%3" [CR]
"RED" ---------------------- Set value of Red
%1 "GREEN" ----------------- Set value of Green
"BLUE" -------------------- Set value of Blue
%2 "0000" – "1000" --------- Directly specify "x" value of color of %1
%3 "0000" – "1000" --------- Directly specify "y" value of color of %1
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Temporarily hide Edge blending menu and edge line
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
47/94