Connecting With A Digital Camera Using A Usb Cable - Sharp DX-C200 User Manual

Hide thumbs Also See for DX-C200:

Table of Contents

2. Getting Started

Attach the cable cover.

• For details about installing printer drivers for USB connection, see the instructions provided on the

driver CD-ROM.

Connecting with a Digital Camera Using a USB Cable

This machine supports direct printing, which allows you to print images taken with a digital camera by

connecting the camera directly to the machine. The following describes how to connect the machine to a

digital camera.

• Use the USB cable bundled with your digital camera.

• Make sure your digital camera supports PictBridge.

Confirm that both the machine and the digital camera are turned on.

Open the cover of the USB flash disk port, connect the USB cable, and then connect the

other end of the cable to your digital camera.

When the machine recognizes the digital camera as a PictBridge device, "PictBridge

Connecting...", then "Ready" will appear on the machine's control panel.