Exiting Pictbridge; When Pictbridge Printing Does Not Work - Sharp DX-C200 User Manual

Hide thumbs Also See for DX-C200:
Table of Contents

Advertisement

Paper size
Use this function to print on paper with the size specified on the digital camera.
Paper size name
A4
1
Letter (8
/
" × 11")
2
N-up layout
Use this function to print 2 or 4 images on the specified paper.
• Depending on the digital camera, a form feed may be inserted after one set of images belonging
to one type ends.

Exiting PictBridge

Use the following procedure to quit the PictBridge mode.
• Do not disconnect the USB cable while data is being sent to the machine. If you do, printing will
fail.
1.
Check that "Ready" is shown on the screen.
2.
Disconnect the USB cable from the machine.
Make sure to close the cover of the USB flash disk port after use.

When PictBridge Printing Does Not Work

This section explains likely causes and possible solutions for problems that can occur when PictBridge
printing.
Direct Printing from a Digital Camera (PictBridge)
Actual size
210 × 297 mm (8.3 × 11.7 in)
1
215.9 × 279.4 mm (8
/
2
× 11 in)
147

Advertisement

Table of Contents
loading

Table of Contents