Table of Contents
Advertisement
Item
Gateway
Configuring the IPv6 Settings
Click the [IPv6 Configuration] tab on the network settings page to configure the IPv6 settings.
IPv6
Item
IPv6
IPv6 Address
Item
DHCP
IP Address (DHCP)
Stateless Address
Gateway Address
Enter the IPv4 address of the network gateway.
Select whether to enable or disable IPv6. You cannot disable IPv6 using
Web Image Monitor if the machine is currently in use in an IPv6
environment. In this case, use the control panel to disable [IPv6] under
network settings.
When disabled, [DHCP], [Manual Configuration Address], [Prefix Length],
and [Gateway Address] below cannot be configured.
Select whether or not the machine obtains its IPv6 address from a DHCP
server. To specify the machine's IPv6 address manually, select [Inactive]
and enter the machine's IPv6 address in [Manual Configuration Address].
Displays the IPv6 address obtained from the DHCP server when [DHCP] is
set to [Active].
Displays up to four stateless auto addresses.
Displays the machine's default gateway address.
Configuring the Network Settings
Description
Description
Description
325
Advertisement
Table of Contents
