Sharp DX-C200 User Manual page 369

Hide thumbs Also See for DX-C200:
Table of Contents

Advertisement

Problem
A Locked Print file is canceled.
There is considerable delay between
the print start command and actual
printing.
Prints fall behind the machine when
they are output.
Prints do not stack properly.
• The machine already has 5 jobs or 5 MB of Locked Print
data. Print or delete an existing Locked Print file. For
details, see p.140 "Printing a Locked Print file" or p.141
"Deleting a Locked Print file".
• Even if the machine cannot store any more Locked Print
files, the machine holds the new Locked Print file for the
period of time specified in [Locked Print] under system
settings before canceling that file. Within this time, you
can print or delete the new Locked Print file. You can also
print or delete an existing Locked Print file so that the new
Locked Print file can be stored in the machine. For details
about [Locked Print], see p.270 "System Settings".
• The Locked Print file has too many pages or it is too large.
Reduce the number of pages to print, or print with a
lower setting for [Gradation:] in [Print Quality]. For
details, see the printer driver Help.
• Processing time depends on data volume. High volume
data, such as graphics-heavy documents, take longer to
process.
• If "Processing..." is displayed on the screen, the machine
is receiving data. Wait for a while.
• To speed up printing, reduce the printing resolution using
the printer driver. For details, see the printer driver Help.
• The machine is calibrating color. Wait for a while.
Pull up the appropriate stop fence (forward fence for A4/
Letter, rear fence for Legal size prints). See p.32 "Exterior:
Rear View".
• Paper is damp. Use paper that has been stored properly.
See p.82 "Paper and Other Media".
• Select [Lvl.2: Medium] or [Lvl.3: Strong] in [Anti-Humidity
Level] under [System Settings]. Note that if you select [Lvl.
2: Medium] or [Lvl.3: Strong], the first print takes longer
than subsequent prints to complete.
• Pull up the appropriate stop fence (forward fence for
A4/Letter, rear fence for Legal size prints). See p.32
"Exterior: Rear View".
Printer Problems
Solution
367

Advertisement

Table of Contents
loading

Table of Contents