Configuring The Dns Settings - Sharp DX-C200 User Manual

Hide thumbs Also See for DX-C200:

Table of Contents

Network Print Setting

mDNS Setting

Printer Name

Configuring the DNS Settings

Click the [DNS] tab on the network settings page to configure the DNS settings.

Select to enable network printing using Internet Print Protocol (via TCP port

Select to enable network printing using an embedded FTP server in the

machine (via TCP port 20/21).

Select to enable network raw printing.

Enter the TCP port number to use for raw printing. The valid range is 1024

to 65535, except 53550 (default is 9100).

Select to enable network printing using LPR/LPD (via TCP port 515).

Select to enable Multicast DNS (via UDP port 5353). If disabled, the item

below cannot be configured.

Enter the name of the machine. Can contain up to 32 characters.

Configuring the Network Settings