Table of Contents
Advertisement
1.
Be sure to check the following points:
• The power switch is turned off.
• The power cord is unplugged from the wall outlet.
• All other cables are unplugged from the machine.
• All paper trays are empty.
2.
If tray 2 is installed, remove it.
3.
Return the scanning unit inside the machine to its original position using [Scanner
Carriage] under [System Settings].
• Toner might spill inside the machine if the machine is not kept level during transit.
• For more information about moving the machine, contact your sales or service representative.
• For details about [Scanner Carriage], see p.270 "System Settings".
Moving the Machine
413
Advertisement
Table of Contents
