Table of Contents
Advertisement
2. Getting Started
2.
Connect the Ethernet cable to the Ethernet port.
3.
Connect the other end of the cable to the network (e.g., a network hub).
4.
Attach the cable cover.
• For details about network environment settings, see p.70 "Configuring the Machine".
• For details about installing printer drivers for network connection, see the instructions provided on
the driver CD-ROM.
Reading the LED lamps
1. Yellow: Flashes when 100BASE-TX or 10BASE-T is being used.
2. Green: Lights up when the machine is properly connected to the network.
66
CES093
CES094
1
2
CES095
Advertisement
Table of Contents
