Table of Contents
Advertisement
8. Configuring the Machine Using Web Image Monitor
SNMP
Item
SNMP
Trap
Item
Target Trap
SNMP Management
Host 1
SNMP Management
Host 2
Community
Item
Get Community
Trap Community
System
Item
Location
330
Select whether to enable the machine to use SNMP services.
Select whether to enable the machine to send traps to the management host
(NMS).
When disabled, [SNMP Management Host 1] and [SNMP Management
Host 2] below become unavailable.
Enter the IP address or host name of a management host. Can contain up to
64 characters.
Enter the IP address or host name of a management host. Can contain up to
64 characters.
Enter the community name to use for authentication of Get requests. Can
contain up to 32 characters.
Enter the community name to use for authentication of Trap requests. Can
contain up to 32 characters.
Enter the location of the machine. The location entered here is displayed on
the main page. Can contain up to 64 characters.
Description
Description
Description
Description
Advertisement
Table of Contents
