Installing The Printer And Options; Installing The Printer; Where To Put The Printer - Sharp DX-C200P Hardware Manual

2. Installing the Printer and Options

This chapter explains how to set up, configure the printer for operation, and install the optional paper
feed unit for this printer.

Installing the Printer

This section describes how to install the printer and perform settings after installation.

Where to Put the Printer

The printer's location should be carefully chosen because environmental conditions greatly affect its
performance.
• The supplied power cord is for use with this equipment only. Do not use with other appliances.
Doing so may result in fire, electric shock, or injury.
• Keep the machine away from flammable liquids, gases, and aerosols. A fire or an electric
shock might occur.
• The wall outlet shall be installed near the machine and shall be easily accessible.
• Connect the machine only to the power source described in this manual. Connect the power
cord directly into a wall outlet and do not use an extension cord. Do not damage, break or
make any modifications to the power cord. Do not place heavy objects on it. Do not pull it hard
nor bend it more than necessary. These actions could cause an electric shock or fire.
• Do not use flammable sprays or solvents in the vicinity of this machine. Doing so could result in
fire or electric shock.
17