Installing The Printer Driver; When The Machine Is Connected To Anetwork - Sharp MX-C400P Software Setup Manual

INSTALLING THE PRINTER
DRIVER
To install the printer driver, follow the appropriate procedure in this section
depending on whether the machine is connected to a network or connected by
USB cable.
☞
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 21)
WHEN THE MACHINE IS CONNECTED TO A
NETWORK
This section explains how to install the printer driver when the machine is
connected to a Windows network (TCP/IP network).
Supported operating systems: Windows 98/Me/NT 4.0
*
Server 2003 /Vista
* Administrator's rights are required to install the software.
• To install the PPD driver when Windows 98/Me/NT 4.0 is used, see "USING
THE STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4.0)"
(page 32) and install the driver using the Add Printer Wizard.
• To use the machine as a network printer in Windows NT 4.0, "TCP/IP
Protocol" must be installed on your computer. If this is not installed, see
Windows NT 4.0 Help to install "TCP/IP Protocol".
• To print to the machine over the Internet using the IPP function when
the machine is installed in a remote location, or to print using the SSL
(encrypted communication) function, see "Printing using the IPP
function and the SSL function" (page 18) and install the printer driver.
• If the machine is connected to an IPv6-only network, the software
cannot be installed by detecting or specifying the machine's address
from the installer.
* * *
/Server 2008 /7
* * *
/2000 /XP /
9