Loading Envelopes - Sharp DX-C200P Hardware Manual

5. Paper and Other Media
6. Lift and slide the tray, then push it all the way in.
To avoid paper jams, make sure the tray is securely inserted.
• The upper limit differs depending on paper type; thin paper or thick paper. Check the engraved
line inside the tray to confirm the upper limit.
• The remaining paper indicator on the right front side of the paper tray shows approximately how
much paper is remaining.
• For details about paper types supported by the machine, see p.51 "Paper and Other Media".
• For details about the paper settings, see p.74 "Setting a paper size using the control panel" and
p.77 "Specifying a paper type for Tray 1 and Tray 2".

Loading Envelopes

The following explains how to load envelopes into Tray 1 and Bypass Tray.
• The inside of this printer becomes very hot. Do not touch parts labelled " " (indicating a hot
surface).
• Before printing on envelopes, make sure to lower the fusing unit levers inside the front cover to
avoid envelopes coming out creased. Also, pull up the levers back to their original positions after
printing. Leaving the levers lowered can cause print quality problems when printing on paper other
than envelopes.
• Since the temperature around the guide is high, wait for it to cool before touching the fusing unit
levers.
Lowering the fusing unit levers
86
CER074