Set up, install, and configure
For Macintosh users
1
From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.
2
Navigate to the list of hardware options, and then add any installed options.
3
Apply the changes.
Installing hardware options
Available internal options
•
Intelligent storage drive (ISD)
–
Fonts
•
Simplified Chinese
•
Traditional Chinese
•
Japanese
•
Korean
•
Arabic
–
Mass storage
•
Printer hard disk
•
Licensed features
–
IPDS
–
Bar Code
•
Wireless module
–
TM
MarkNet
N8370
–
MarkNet N8372
•
Trusted Platform Module (TPM)
Notes:
•
An ISD or a hard disk is required to activate formsmerge and other features.
•
Some IPDS features require an ISD or a hard disk.
Note: Some options are available only in some printer models. For more information, contact the place
where you purchased the printer.
Installing optional trays
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet, and then from the printer.
34