Table of Contents
Advertisement
4. Configuration
• Connection cannot be established if the selected Ethernet speed does not match your network's
transmission speed.
• The use of this feature is recommended. To use it, select [Auto Select].
1.
Press the [Menu] key.
2.
Press the [ ] or [ ] key to display [Host Interface], and then press the [OK] key.
Menu:
Host Interface
3.
Press the [ ] or [ ] key to display [Network Setting], and then press the [OK] key.
Host Interface:
Network Setting
4.
Press the [ ] or [ ] key to display [Ethernet Speed], and then press the [OK] key.
Network Setting:
Ethernet Speed
5.
Press the [ ] or [ ] key to select the Ethernet speed, and then press the [OK] key.
6.
Press the [Menu] key.
7.
Print a configuration page to confirm the settings made.
• For details about printing the configuration page using control panel, see p.30 "Test Printing".
50
CER408
Advertisement
Table of Contents
Troubleshooting
