Cleaning The Registration Roller And The Paper Tray - Sharp DX-C200P Hardware Manual

Cleaning the Registration Roller and the Paper
Tray
The surrounding registration roller or paper tray might get dirty with paper dust when using paper other
than standard paper.
If white spots appear on the printout due to paper dust, wipe the paper tray and registration roller.
• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take these
precautions could result in fire or electric shock.
• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
• Do not pull out the paper tray forcefully. If you do, the tray might fall and cause an injury.
• Do not put your hands inside the printer when the input tray is removed. Some internal parts
become hot and are a burn hazard.
• Do not use chemical cleaner or organic solvent such as thinners or benzine.
• Do not touch the transfer roller.
1. Turn off the power switch.
2. Unplug the power cord from the wall outlet. Remove all the cables from the printer.

Cleaning the Registration Roller and the Paper Tray

113