Connecting The Printer; Network Connection - Sharp DX-C200P Hardware Manual

3. Connecting the Printer

This chapter explains how to connect network and USB cables.

Network Connection

Follow the procedure below to connect the printer to the computer through the network. Prepare a hub,
straight-through Ethernet cable, and any other necessary network devices before connecting the
10BASE-T or 100BASE-TX cable to the printer's Ethernet port.
• Connect only an approved network interface board to this printer. A voltage overload can
occur if you connect an incorrect network interface board, such as a telephone line interface, to
the printer.
• For users outside the United States of America: properly shielded and grounded cables and
connectors must be used for connections to a host computer (and/or peripheral) in order to
meet emission limits.
• For users in the United States of America: properly shielded and grounded cables and
connectors must be used for connections to a host computer (and/or peripheral) in order to
meet FCC emission limits.
• The Ethernet cable is not supplied with this printer. Select your cable according to the network
environment.
1. Remove the cable cover.
CER080
35