Additional Troubleshooting - Sharp DX-C200P Hardware Manual

Hide thumbs Also See for DX-C200P:
Table of Contents

Advertisement

8. Troubleshooting

Additional Troubleshooting

Problems
Strange noise is heard.
No e-mail is received when an Alert
occurs, and after resolving an Alert.
No e-mail notification is received even
though advance auto e-mail
notification was set using Web Image
Monitor or the control panel.
When no date information is included
in sent e-mail, the mail server has a
malfunction.
• If the printer is still not operating satisfactorily, contact your sales or service representative. Consult
with the store where the printer was purchased for information about the location of sales or service
representatives.
136
If a supply was recently replaced or an option attached in
the area the strange noise is coming from, check the supply
or option is properly attached. If the strange noise persists,
contact your sales or service representative.
• Confirm the setting using Web Image Monitor.
Confirm that [Auto E-mail Notification] setting is
specified.
• When the power is turned off before the e-mail is
transmitted, the e-mail will not be received.
• Check the e-mail address set for the destination. If the
email was sent but not received, it is possible the
destination was incorrect. Also check error mail
information from the e-mail server.
After changing the setting, turn the main unit's power off and
then back on again.
Make the setting for obtaining time information from the
SMTP server. For details, see "Printer Status Notification by
E-Mail", Software Guide.
Solutions

Advertisement

Table of Contents
loading

Table of Contents