When "Misfd: Stnd Tray" Appears - Sharp DX-C200P Hardware Manual

2. Carefully remove misfed paper under the transfer unit.
If you cannot find the misfed paper, look inside the printer.
3. Close the front cover with both hands carefully.
• When closing the front cover, push the upper side of the cover firmly. After closing the cover, check
that the error is cleared.

When "Misfd: Stnd Tray" Appears

"Misfd: Stnd Tray" appears when a paper jam has occurred in the fusing unit.
Open the front cover and remove the paper following the same procedure as for internal path.
• For details about the procedure, see p.138 "When "Internal Misfeed" Appears".
CER046
CER061
When Paper is Jammed
143