Configuring Novell GroupWise
This section describes how GroupWise is integrated with CallPilot. For information on how to use
GroupWise to address, compose, open, delete, and perform other CallPilot operations, refer to the
CallPilot 2.5 Unified Messaging User Guide for Novell GroupWise or the online Help.
Note: If the subscriber uses Novell GroupWise, the subscriber must have Windows
Messaging 4.0 installed on their computer. Windows Messaging is usually installed
when Windows is installed on a computer. However, if Windows Messaging 4.0 is not
installed, the GroupWise installation gives you these options:
After you install GroupWise, you must configure it for Unified Messaging.
Removing the CallPilot Message Store
When you install Unified Messaging on the computer of a subscriber who uses GroupWise, the
CallPilot Message Store folder is added to the subscriber's GroupWise mailbox.
You or the subscriber can use this procedure to remove the CallPilot Message Store from
GroupWise.
To remove the CallPilot Message Store
1
Click the Windows Start button, point to Settings and click Control Panel.
The Control Panel window appears.
2
Click the Add/Remove Programs icon.
The Add/Remove Programs Properties dialog box appears.
3
In the list select CallPilot Unified Messaging for Novell GroupWise.
4
Click the Remove button.
The dialog window opens to confirm the deletion.
5
Click OK.
To configure GroupWise for Unified Messaging
1
Start GroupWise.
2
On the Tools menu click CallPilot, point to CallPilot Configuration, and click CallPilot
Configuration Menu.
The CallPilot Unified Messaging dialog box appears.
Chapter 3 Installing and configuring Unified Messaging
•
Install the complete Windows Messaging system.
•
Leave Windows Messaging as is.
Install the Complete Windows Messaging system even if Windows Messaging
is already installed. This ensures that the GroupWise option is available during
Unified Messaging installation.
BCM 4.0 Unified Messaging Configuration Guide
31