Connecting The Handset; Installing The Stand (Optional) - Cisco Small Business SPA502G User Manual

Installing Your Phone

Connecting the Handset

Connecting the Handset

STEP 1
!
CAUTION
STEP 2
STEP 3
STEP 4

Installing the Stand (Optional)

NOTE
STEP 1
STEP 2
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
Turn the phone body over to expose the ports on the back of the unit.
Do not insert a telephone line cord into the AUX (auxiliary) port.
Insert the long end of the phone cord into the handset port on the phone body that
is marked with a phone symbol.
(Optional) Route the phone cord through the cable slot.
Insert the other end of the phone cord into the port at the bottom of the handset
(not shown).
Do not attach the desk stand if you want to mount the phone to the wall. If you are
attaching a Cisco SPA 500S attendant console, attach the console before attaching
the desk stand.
Connect the phone stand by lining up the tabs on the stand with the slots on the
phone body.
Slide the bottom tabs into the lower slots on the phone body and lightly press
down on the stand. It should easily slide into the upper stand slots. Do not force.
2
17