Connecting The Cisco Spa 500S Attendant Console To The Ip Phone - Cisco Small Business SPA502G User Manual

Using the Cisco SPA 500S Attendant Console

Connecting the Cisco SPA 500S Attendant Console to the IP Phone

Connecting the Cisco SPA 500S Attendant Console to the IP
Phone
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
The Cisco SPA 500S is a 32-button attendant console for the Cisco SPA 500
Series IP Phones, providing 32 three-color (red, green, and orange) programmable
LEDS. The Cisco SPA 500S attaches to the IP phone with the attachment arm
provided. It obtains power directly from the IP phone and does not require a
separate power supply. Two Cisco SPA 500S units can be attached to a single IP
phone to monitor a total of 64 separate lines.
To connect the Cisco SPA 500S Attendant Console to the IP phone, you need the
following:
• Cisco SPA 500S Attendant Console
• Attachment Arm
• Two (2) Attachment Arm Screws
• Auxiliary Interconnect Cable
• Stand
6
56