Using Hold And Resume; Using Mute - Cisco Small Business SPA502G User Manual

Using Basic Phone Functions

Using Hold and Resume

NOTE

Using Hold and Resume

Using Mute

Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
Techniques to place a call without dialing a number:
• Press Redial to dial the last number.
• If you have configured speed dials, press the assigned speed dial code and
then press AbbrDial.
• To answer a call that is ringing on another phone in the phone system, press
Pickup. Then enter the extension number of the ringing phone.
You also can place a call by choosing a number from a directory or from the Call
History. See Using the Local Directory, page 38
page 38.
To put a call on hold, press the Hold button. A series of beeps or music on hold
plays for the caller to indicate that the call is on hold.
To resume the call, press the flashing red line button for the call. (On the Cisco SPA
502G, press the Resume softkey.) If you have multiple calls, all calls are put on hold
except the active call.
If you are on a call and another call comes in, press the flashing red line button or
press the Hold button to place the call on hold and answer the incoming call. To
resume the first call, press the line button for the call or select it using the Up or
Down navigation button and press the Resume softkey (Cisco SPA 502G).
When Mute is enabled, you can hear other parties on a call, but they cannot hear
you. You can use this feature on the handset, speakerphone, or headset.
• To toggle Mute on: Press the Mute button. The LED is lit.
• To toggle Mute off: Press the lit Mute button.
and Using the Call History Lists,
3
31