Using Star Codes - Cisco SPA501 User Manual

Using Advanced Phone Features

Using Star Codes

Using Star Codes
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide
You can set just one of these choices, if necessary.
Your IP phone can support numerous "star codes" to access phone supplementary
services. These codes, which start with *, are entered before dialing a telephone
number and provide services. For example, to block caller ID (star code 67), you
would dial *67, followed by the telephone number you are calling.
Following is a list of commonly-used star codes. Some star codes may not be
available to you; consult your system administrator for more information.
Code Definition
16 Activate Secure Call feature for all calls.* See
17 Deactivate Secure Call feature for all calls.* See
page 49.
18 Activate Secure Call feature for a single call.* See
page 49.
19 Deactivate Secure Call feature for a single call.* See
page 49.
36 Pick up a call at another extension.* See
37 Pick up a group call.* See
38 Park a call.* See
39 Unpark a call.* See
56 Activate call waiting. See
57 Deactivate call waiting. See
66 Activate Call Back. Causes the IP phone to repeatedly dial a busy number
until the called party rings or answers. The IP phone then alerts you that the
call has gone through.
67 Block Caller ID. See
Picking Up a Call, page
Parking a Call, page 40.
Parking a Call, page
Setting Call Waiting, page
Setting Call Waiting, page
Blocking Caller ID, page
Using Secure Call, page
Using Secure Call,
Using Secure Call,
Using Secure Call,
Picking Up a Call, page
39.
40.
38.
38.
48.
4
49.
39.
58