Download The Firmware From Cisco; Get The Phone Ip Address; Update The Firmware On The Phone - Cisco SPA501 User Manual

Sip ip phones
Table of Contents

Advertisement

Installing Your Phone
Updating Your Phone Firmware
STEP 1
STEP 2
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 1
NOTE
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide
Cisco SPA501G:
Press the Setup button.
Enter 150, then press #. The firmware version is recited.

Download the Firmware from Cisco

Go to www.cisco.com/cisco/software/navigator.html?a=a&i=rpm, and enter
the phone model number (for example, SPA504G) in the Software Search box.
Save the firmware to your desktop.

Get the Phone IP Address

Before you upgrade, you'll need the IP address of the phone you are upgrading. To
get your IP address for all phones (except on the Cisco SPA501G):
Press Setup.
Scroll to Network and press Select.
Scroll to view Current IP. This is the IP address of your phone.
To get your IP address for the Cisco SPA501G phone:
Press the Setup button.
Enter 110, then press #. The IP address is recited.

Update the Firmware on the Phone

To update the firmware on the phone:
Download the updated firmware onto your PC.
If you are in a VPN connection, you might need to disconnect from the network
before proceeding so that your PC can communicate directly with your phone for
the upgrade.
2
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents