Table of Contents
Advertisement
Select
Built-In Device Options
Port Options (all are enabled by
default)
Set Security Level
Restore Security Defaults
110 Chapter 5 Computer Setup
To do this
NOTE:
Availability of the options above varies by computer model.
●
Enable/disable secondary battery fast charge (enabled by default).
●
Enable/disable HP QuickLook 2 (enabled by default).
●
Enable/disable Virtualization Technology (select models only; enabled by default).
●
Enable/disable TXT (Intel® Trusted Execution Technology) (select models only;
enabled by default).
●
Enable/disable Dual Core CPU (select models only; enabled by default).
●
Enable/disable the wireless button state (enabled by default).
●
Enable/disable embedded WWAN device radio (select models only; enabled by
default).
●
Enable/disable embedded Bluetooth® device radio (enabled by default).
●
Enable/disable the Network Interface Controller (LAN) (enabled by default).
●
Set the wake on LAN state. Options include the following:
◦
Disabled
◦
Boot to Network (set by default)
◦
Follow Boot Order
●
Enable/disable the fingerprint device (enabled by default).
●
Enable/disable a modem device (enabled by default).
NOTE:
All port options are enabled by default.
●
Enable/disable the smart card slot.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION:
Disabling the USB port also disables MultiBay devices and ExpressCard
devices on the advanced port replicator.
●
Enable/disable the 1394 port.
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.
Advertisement
Table of Contents
