Configuring The Streaming Audio Server; Using A Fax Machine With The Spa2102 Or Spa8000 - Linksys SPA1001 Administrator User Manual

Chapter 3 Configuring Linksys ATAs
On

Configuring the Streaming Audio Server

The following provides step-by-step procedures for implementing an SAS with an external music
source.
Connect an RJ-11 adapter between the music source and an FXS port on the Linksys ATA (Phone 1 or
Step 1
Phone 2).
Step 2 On the administration web server, click the SIP tab and scroll down to the Streaming Audio Server
section (see
Figure 1-16 Enabling the Streaming Audio Server
On the SAS Enable pull-down selection list, select yes.
Step 3
In the MOH Server field of the Call Feature Settings section, enter the User ID configured for the line
Step 4
attached to the audio source.
If the line is not registered with the SIP proxy, enter the IP address and SIP port number configured for
the line.
Step 5 Click Submit All Changes.

Using a FAX Machine with the SPA2102 or SPA8000

Note T.38 Fax is only supported on the SPA2102 and the SPA8000. The SPA2102 supports a single
connection, whilethe SPA8000 supports one connection for each pair of ports (1/2, 3/4, 5/6, and 7/8) for
a maximum of four connections.
Procedure
To optimize fax completion rates, complete the following steps:
Document Version 3.1
SAS Enable[1] = no
MOH Server [1] = 1002@192.168.2.100:5061 or 1002@127.0.0.1:5061
SAS Enable[2] = yes
Linksys ATA
2:
SAS Enable[1] = no
MOH Server [1] = 1002@192.168.2.100:5061
SAS Enable[2] = no
MOH Server [2] = 1002@192.168.2.100:5061
Figure 1-16).
Using a FAX Machine with the SPA2102 or SPA8000
Linksys ATA Administrator Guide
3-15