Where To Go From Here; Chapter 2 Getting Started - Linksys SPA1001 Administrator User Manual

Chapter 1 Introducing Linksys Analog Telephone Adapters
•
•

Where to Go From Here

To
Use the different administration and
configuration tools provided for managing
Linksys ATAs.
Complete the basic configuration of a Linksys
ATA.
Configure the Linksys SPA3102 or AG310 for
providing PSTN connectivity.
Look up the function and usage for each field or
parameter on the ATA administration web server
pages.
Look up the expansion of acronyms used in this
document.
Define the terms used in this document.
Understand the operations of ATA user features.
The following documentation provides additional information about features and functionality of
Linksys ATAs:
•
•
•
The following documentation describes how to use and configure other Linksys VoIP products:
•
•
•
Document Version 3.1
responds to a special NAT-Mapping-Discovery request by sending back a message to the source IP
address/port of the request, where the message contains the source IP address/port of the original
request. The Linksys ATA system can send this request when it first attempts to communicate with
a SIP entity over the Internet. It then stores the mapping discovery results returned by the server.
Communicate the NAT mapping information to the external SIP entities.
If the entity is a SIP Registrar, the information should be carried in the Contact header that
overwrites the private address/port information. If the entity is another SIP UA when establishing a
call, the information should be carried in the Contact header as well as in the SDP embedded in SIP
message bodies. The VIA header in outbound SIP requests might also need to be substituted with
the public address if the UAS relies on it to route back responses.
Extend the discovered NAT mappings by sending keep-alive packets.
Because the mapping is alive only for a short period, the Linksys ATA system continues to send
periodic keep-alive packets through the mapping to extend its validity as necessary.
AA Quick Guide
IVR Quick Guide
SPA Provisioning Guide
SPA9000 Administrator Guide
LVS CTI Integration Guide
LVS Integration with ITSP Hosted Voicemail Guide
Refer to
Chapter 2, "Getting Started"
Chapter 3, "Configuring Linksys ATAs"
Chapter 4, "Configuring the PSTN Gateway
(FXO)"
Chapter 5, "Linksys ATA Field Reference"
Appendix A, "Acronyms"
Appendix B, "Glossary"
Appendix C, "User Guidelines"
Linksys ATA Administrator Guide
Where to Go From Here
1-13