Pstn User Tab (Spa3102/Ag310); Pstn-To-Voip Selective Call Forward Settings; Pstn-To-Voip Speed Dial Settings; Pstn Ring Thru Line 1 Distinctive Ring Settings - Linksys SPA1001 Administrator User Manual

PSTN User Tab (SPA3102/AG310)

PSTN User Tab (SPA3102/AG310)
This section describes the fields for the following headings on the PSTN User tab on the SPA3102:
•
•
•
•
•
References in this section to the SPA3102 also apply to the AG310.
Note

PSTN-To-VoIP Selective Call Forward Settings

Field
Cfwd Sel1 Caller
Cfwd Sel1 Dest
Block Last Caller
Accept Last Caller

PSTN-To-VoIP Speed Dial Settings

Field
Speed Dial 2/3/4/5/6/7/8/9

PSTN Ring Thru Line 1 Distinctive Ring Settings

Field
Ring1/2/3/4/5/6/7/8 Caller
Linksys IP Phone Administrator Guide
5-70
PSTN-To-VoIP Selective Call Forward Settings, page 5-70
PSTN-To-VoIP Speed Dial Settings, page 5-70
PSTN Ring Thru Line 1 Distinctive Ring Settings, page 5-70
PSTN Ring Thru Line 1 Ring Settings, page 5-71
PSTN/VoIP Caller Commands via DTMF, page 5-71
Description
First of eight PSTN Caller Number Patterns to be blocked for VoIP gateway services or
forwarded to a certain VoIP number. If the caller is blocked, the SPA will not auto-answers
the call.
VoIP destination to forward a PSTN caller matching <Cfwd Sel1 Caller>. If this entry is
blank, the PSTN caller is blocked for VoIP service.
ID of caller blocked via the Block Last Caller service
ID of caller accepted via the Accept Last Caller service
Description
The VoIP number to call when the PSTN caller dials a single digit '2'
Description
First of 8 PSTN Caller Number Patterns such that the corresponding ring will be used to
ring through Line 1 if the PSTN caller matches this pattern.
Chapter 5 Linksys ATA Field Reference
Document Version 3.2