Entering A Password Through The Ivr - Linksys SPA1001 Administrator User Manual

Chapter 2 Getting Started
Table 1-25 IVR Options (continued)
User Factory Reset of
Unit
WARNING:
ALL "User-Changeable"
NON-DEFAULT
SETTINGS WILL BE
LOST!
This might include
network and service
provider data.
Factory Reset of Unit
WARNING:
ALL NON-DEFAULT
SETTINGS WILL BE
LOST!
This includes network
and service provider
data.
Note The items marked with "Requires Password" only require a password if the Administrator password is
set.

Entering a Password through the IVR

Note
Document Version 3.1
877778 Enter 1 to confirm
Enter *(star) to cancel
operation
73738 (RESET) Enter 1 to confirm
Enter * (star) to cancel
operation
To input the password using the phone keypad, the following translation convention applies:
To input: A, B, C, a, b, c—press "2'
–
– To input: D, E, F, d, e, f—press "3'
– To input: G, H, I, g, h, i—press "4'
– To input: J, K, L, j, k, l— press "5'
– To input: M, N, O, m, n, o—press "6'
– To input: P, Q, R, S, p, q, r, s—press "7'
– To input: T, U, V, t, u, v—press "8'
– To input: W, X, Y, Z, w, x, y, z—press "9'
– To input all other characters in the Administrator account password, press "0'
This translation convention only applies to the password input.
Using the Interactive Voice Response Interface
Linksys ATA prompts for confirmation.
After confirming, you hear "Option
Successful." Hang up. Unit reboots and
all "User Changeable" configuration
parameters are reset to factory default
values.
Linksys ATA prompts for confirmation.
After confirming, you hear "Option
Successful." Hang up. Unit reboots and
all configuration parameters are reset to
factory default values.
Linksys ATA Administrator Guide
2-21