System Tab; System Configuration; Internet Connection Type (Pap2T) - Linksys SPA1001 Administrator User Manual

System Tab

System Tab
This section describes the fields for the following headings on the System tab:
•
•
•
•

System Configuration

Field
Restricted Access Domains
Enable Web Server
Web Server Port
Enable Web Admin Access
Admin Passwd
User Password

Internet Connection Type (PAP2T)

Field
DHCP
Static IP
NetMask
Linksys IP Phone Administrator Guide
5-8
System Configuration, page 5-8
Internet Connection Type (PAP2T), page 5-8
Optional Network Configuration (PAP2T), page 5-9
Miscellaneous Settings (Not in PAP2T), page 5-10
Description
This feature is used when implementing software customization.
Enable/disable web server of Linksys IP phone
This feature should only be used on firmware version 1.0.9 or later.
The default is yes.
Port number of the Linksys IP phone administration web server.
The default is 80.
Lets you enable or disable local access to the administration web server. Select yes or no
from the drop-down menu.
The default is yes.
Password for the administrator.
The default is no password.
Password for the user.
The default is no password.
Description
Enable or disable DHCP.
The default is yes.
Static IP address of Linksys IP phone, which takes effect if DHCP is disabled.
The default is 0.0.0.0.
The NetMask used by Linksys IP phone when DHCP is disabled.
The default is 255.255.255.0.
Chapter 5 Linksys ATA Field Reference
Document Version 3.2