Three-Way Ad-Hoc Conference Calling; Call Return - Linksys SPA1001 Administrator User Manual

Enhanced Services

Three-Way Ad-Hoc Conference Calling

Service description
User action required to
activate or use
Expected call and
network behavior
User action required to
deactivate or end

Call Return

Service description
User action required to
activate or use
Expected call and
network behavior
User action required to
deactivate or end
Linksys ATA Administrator Guide
C-8
This feature allows the user to conference up to two other numbers on the
same line to create a three-way call.
If you are already on a call and wish to add a third party:
Press the switch hook or flash button
1.
Listen for dial tone
2.
Dial the third party normally
3.
When the third party number starts to ring press the switch hook or
4.
flash button again
You now have the original caller and the third party together with you on
the same call.
If you want to initiate a new three-way call:
Call the first party in the normal manner
1.
Follow the directions for adding a third party (see instructions above)
2.
The SPA can host a three-way conference and perform three-way audio
mixing (without the need of an external conference bridge device or
service).
If you also have Call Transfer, you can also hang up at any time to transfer
the original caller to the third party
The SPA supports a service that allows the SPA to automatically dial the
last caller's number.
Pick up the receiver
1.
Listen for dial tone
2.
Press *69 to dial back the last caller that tried to reach you.
3.
This service gives the user the convenience of recalling the last incoming
call to their number automatically.
No user action required.
Appendix C User Guidelines
Document Version 3.01