Example Sas With Moh; Sas Line Registered With The Proxy Server; Sas Line Not Registered With The Proxy Server - Linksys SPA1001 Administrator User Manual

Configuring a Streaming Audio Server
If the Linksys ATA boots and finds that the SAS line is on-hook, it will not remove battery from the line
so that IVR may be used. But if the Linksys ATA boots up and finds that the SAS line is off-hook, it will
remove battery from the line because no audio session is in progress.

Example SAS with MOH

Figure 1-15 MOH Application with a Linksys ATA Line Configured as an SAS
SPA1:
IP=192.168.2.100
UserID[1]=1001, SIP Port[1]=5060
UserID[1]=1002, SIP Port[1]=5061
The following configuration examples are based on the configuration shown in

SAS Line Registered with the Proxy Server

In this example, the SAS Line is registered with the Proxy Server as the other subscribers.
On
On

SAS Line Not Registered with the Proxy Server

In this example, the SAS Line is not registered with the Proxy Server for the other subscribers.
On
Linksys ATA Administrator Guide
3-14
Phone 1
Phone 2
Media
signal
adapter
Music
source
Linksys ATA
1:
SAS Enable[1] = no
MOH Server [1] = 1002
SAS Enable[2] = yes
Linksys ATA
2:
SAS Enable[1] = no
MOH Server [1] = 1002
SAS Enable[2] = no
MOH Server [2] = 1002
Linksys ATA
1:
IP Network
Line in
Chapter 3 Configuring Linksys ATAs
SPA2:
IP=192.168.2.200
UserID[1]=2001, SIP Port[1]=5060
UserID[1]=2002, SIP Port[1]=5061
Phone 1
Phone 2
Figure 1-15.
Document Version 3.1