Pap2T - Linksys SPA1001 Administrator User Manual

Chapter 2 Getting Started
Table 1-5
LED
Power
Ethernet 1-4
Voice Status
Phone
Line
DSL
Internet
Table 1-6
Port
DSL
Line
Phone
Ethernet 1-4
Power

PAP2T

The PAP2T provides two FXS ports (see
Document Version 3.1
AG310 Front Panel
Function
Steady green indicates power on and Internet connection. Flashing indicates
not connected to the Internet, booting or firmware upgrade.
Steady green indicates an active connection to the network. Flashing
indicates traffic.
Steady green indicates that a voice call is currently in progress.
Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Steady green when a telephone or fax machine has an active connection to
traditional phone service through the Line port.
Steady green indicates that the DSL connection is active.
Steady green indicates active connection. Flashing indicates traffic.
AG310 Back Panel
Function
Connect to the telephone wall jack providing DSL service using a RJ-11
cable.
Connect to a standard telephone wall jack with an RJ-11cable.
Connect to an analog telephone or fax machine with an RJ-11 cable.
Connect to network devices, such as a PC or a switch, using an Ethernet
cable.
Connect to the power supply.
Linksys Analog Telephone Adapters (ATAs)
Figure 1-5).
Linksys ATA Administrator Guide
2-3