Disable Or Cancel Call Waiting - Linksys SPA1001 Administrator User Manual

Enhanced Services

Disable or Cancel Call Waiting

Service description
User action required to
activate or use
Expected call and
network behavior
User action required to
deactivate or end
Linksys ATA Administrator Guide
C-4
The SPA supports disabling of call waiting permanently or on a per-call
basis.
To temporarily disable Call Waiting (for the length of one call) do the
following before placing a call:
Lift Receiver
1.
Press *70
2.
Listen for dial tone, then dial the number you want to call.
3.
Call Waiting is now disabled for the duration of this call only.
To deactivate Call Waiting while on a call:
Press the switch hook or flash button briefly. This puts the first call on
1.
hold.
Listen for three short tones and then a dial tone.
2.
Press *70
3.
Listen for dial tone then return to your call by pressing the switch hook
4.
or flash button.
Call Waiting is now disabled for the duration of this call.
To deactivate Call Waiting while on a permanent basis (until cancelled):
Lift the receiver
1.
Listen for dial tone
2.
Press *57
3.
You will hear a confirmation tone signaling your request to cancel Call
Waiting has been accepted.
Callers who dial your number receive a busy signal, or the caller is
forwarded to voice mail or another predetermined forwarding number, if
available.
If you have cancelled Call Waiting temporarily, no user action is required.
If you deactivated call waiting and wish to reinstate the service, do the
following:
Lift the receiver
1.
2. Listen for dial tone
3. Press *57
You will hear a confirmation tone signaling your request to cancel Call
Waiting has been accepted.
Appendix C User Guidelines
Document Version 3.01