Chapter 8: Configuring The Wireless Usb Network Adapter - Linksys WUSB11 User Manual

Chapter 8: Configuring the
Wireless USB Network Adapter
After installing the Network Adapter, Windows 98SE, Me, 2000, and XP will
automatically identify the Adapter. Next, you may need to configure the
Adapter's driver software.
Important for Windows XP users: Windows XP has built-in config-
uration tools. Use the Windows XP Wireless Zero Configuration, (in
the system tray at the bottom of your screen) to configure the Adapter
See Chapter 6: Installation and Configuration of the USB Drivers for
Windows XP.
1. After installing the Adapter, the Wireless USB Network Adapter WLAN
Monitor icon will appear on your system tray. Double-click on the icon of
the monitor in Figure 8-1, and Figure 8-2 will appear:
Figure 8-2 shows you the status of your current connection on the Link
Status page. Click the X (Close) button in the upper right corner to close
the WLAN Monitor or click the Connections button to continue.
23
Instant Wireless
Figure 8-1
Figure 8-2
TM Series Wireless USB Network Adapter
2. The screen in Figure 8-3 shows you any available wireless device for net-
work connection. Select the wireless device, and click the Connect button
to connect or the Refresh button to search for more wireless devices.
Attempt Auto-Connect to ANY network in range will connect you to the
closest network within range. Click the X (Close) button in the upper right
corner to close
the
Monitor
click
P r o f i l e
Setting button
to continue.
3. When the screen in Figure 8-4 appears, click on the New button to create a
new profile or select a profile and click on the edit button to change an
existing profile or Click on the Delete button to delete a profile. Select a
profile and click the Connect button to connect.
WLAN
or
the
Figure 8-3
Figure 8-4
24