Distinctive Ring Settings; Ring Settings - Linksys SPA1001 Administrator User Manual

User 1/2 Tab
Field
Accept Media Loopback
Request
Media Loopback Mode
Media Loopback Type

Distinctive Ring Settings

Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest match) will
be used for alerting the subscriber.
Field
Ring1/2/3/4/5/6/7/8 Caller

Ring Settings

Field
Default Ring
Default CWT
Hold Reminder Ring
Call Back Ring
Cfwd Ring Splash Len
Cblk Ring Splash Len
Linksys IP Phone Administrator Guide
5-68
Description
Determines how the media loopback request is enabled. Choose automatic, never, or
manual.
The default is automatic.
Determines the media loopback mode. Choose source or mirror.
Determines the media loopback type. Choose media or packet.
Description
Caller number pattern to play Distinctive Ring/CWT 1, 2, 3, 4, 5, 6, 7, or 8.
The default is blank.
Description
Default ringing pattern, 1 – 8, for all callers.
The default is 1.
Default CWT pattern, 1 – 8, for all callers.
The default is 2.
Ring pattern for reminder of a holding call when the phone is on-hook.
The default is None.
Ring pattern for call back notification.
The default is None.
Duration of ring splash when a call is forwarded
(0 – 10.0s).
The default is 0.
Duration of ring splash when a call is blocked (0 – 10.0s).
The default is 0.
Chapter 5 Linksys ATA Field Reference
Document Version 3.2