Wrt54Gp2 - Linksys SPA1001 Administrator User Manual

Chapter 2 Getting Started

WRT54GP2

The WRP54GP2 provides an ATA with two FXS ports and a Wireless-G multiport IP router (see
Figure
connectivity to a LAN with a built-in four-port switch. The IP router provides QoS support, an integrated
firewall and VPN pass-through, and full routing with DHCP and NAT.
Figure 1-13 WRT54GP2
The following tables describe the LEDS on the front panel and the ports on the back panel of the device.
Table 1-22 WRT54G P2 Front Panel
LED
Power
WLAN
Ethernet 1-3
Phone 1/2
Internet
Table 1-23 WRTP54G Back Panel
Port
Internet
Phone 1/2
Document Version 3.1
1-13). The WRP54GP2 provides connectivity to an analog telephone as well as Internet
Function
Steady green indicates that the power supply is connected and the device is
functioning.
Steady green indicates an active connection to the network. Flashing
indicates traffic.
Steady green indicates an active connection to the network. Flashing
indicates traffic.
Steady green when telephone or fax machine has an active or registered
connection to the ITSP through the Phone port. Flashing indicates phone is
in use or off hook.
Steady green indicates active connection. Flashing indicates traffic.
Function
Connect to the broadband (cable/DSL) modem using an Ethernet cable.
Connect to an analog telephone or fax machine using an RJ-11 cable.
Linksys Analog Telephone Adapters (ATAs)
Linksys ATA Administrator Guide
2-13