Spa1001 - Linksys SPA1001 Administrator User Manual

Chapter 2 Getting Started
Figure 1-6
The following tables describe the LEDS on the front panel and the ports on the back panel of the device.
Table 1-9
LED
Ethernet 1-4
Phone 1/2
Internet
Table 1-10 RTP300 Back Panel
Port
Internet
Phone 1/2
Ethernet 1-4
Power

SPA1001

The SPA1001 provides one FXS port (see
Document Version 3.1
RTP300
RTP300 Front Panel
Function
Steady green indicates an active connection to the network. Flashing
indicates traffic.
Steady green when telephone or fax machine has an active or registered
connection to the ITSP through the Phone port. Flashing indicates phone is
in use or off hook.
Steady green indicates active connection. Flashing indicates traffic.
Function
Connect to the broadband (cable/DSL) modem using an Ethernet cable.
Connect to an analog telephone or fax machine using an RJ-11 cable.
Connect to local IP devices, such as PCs, using an Ethernet cable.
Connect to a 12v DC power supply.
Linksys Analog Telephone Adapters (ATAs)
Figure 1-7).
Linksys ATA Administrator Guide
2-5