Figure 4-4: The Setup Wizard's Wireless Channels Screen; Figure 4-5: The Setup Wizard's Finalize Settings Screen - Linksys WUSB11 User Manual

Wireless-B USB Network Adapter
4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc Mode, select the correct
operating channel for your network. The channel you choose should match the channel set on the other
devices in your wireless network. Then click the Next button.
5. The Setup Wizard will ask you to review your settings before it starts to copy files. Click the Next button to
save these settings, or click the Back button to change any settings.
If you're using Windows 2000, you may see a Windows Digital Signature warning. As this product has been
tested to work with Windows, you may continue.
Chapter 4: Software Installation and Configuration for Windows 98SE, Me, and 2000
The Installation Procedure

Figure 4-4: The Setup Wizard's Wireless Channels screen

Figure 4-5: The Setup Wizard's Finalize Settings screen

9