User Password - AT&T Synapse SB67020 User Manual

User Password

Use the User Password menu to set or reset your user password. This setting can also be controlled on the WebUI. If you create
a password, you will need to enter it before accessing User Settings, Voicemail, and the WebUI.
To access the Password function:

User Passw ord
1. Set/Change Passw ord
2. Reset Passw ord
Figure 82. Password Menu
Yes
Figure 83. Reset Password
Deskset Settings
Synapse SB67020 User's Guide
Press MENU, then 2, and then 5 to display the User Password screen shown in
Figure 82.
Press 1 to set or change the password. Follow the steps in

Password" on page
Press 2 to reset your password. The confirmation screen shown in Figure 83

displays.
Press
No
User password has been reset appears. The User Password screen
displays.
Once the password has been reset, password entry is no longer necessary for
User Settings, Voicemail, and the WebUI.
69.
to confirm that you want to reset your password. The message
68
"Change User