Voicemail Greetings - AT&T Synapse SB67020 User Manual

Voicemail Greetings

You can have three different greetings for your Voicemail. You can then activate the one that is currently appropriate. You can
record a Primary Greeting to use most of the time and an Alternate Greeting for when you are out of the office. The Pre-Set
greeting, "Please leave a message after the tone," is used when no other greeting is recorded.
To activate a greeting:

Voicem ail Greetings
Prim ary [ACTIVE]
Alternate
Activate PlayRec
Figure 47. Voicemail Greetings
Voicem ail Greetings
Alternate
Pre-Set
Activate Play
Figure 48. Non-active Greeting
Selected
Deskset Settings
Synapse SB67020 User's Guide
1. Press MENU, then 2, then 1, and then 1 to display the Voicemail Greetings menu
shown in Figure 47.
Press the and

Pre-Set greeting to be played to outside callers. When you highlight the
Pre-Set greeting, the soft keys change, as shown in Figure 48.
You cannot delete or record over the Pre-Set greeting.
2. Press to make the highlighted greeting the greeting played to callers. The
system checks to see if the selected greeting has been recorded.
If the selected greeting has been recorded, [ACTIVE] appears beside the

selected greeting.
If a greeting has not been recorded, Greeting not recorded displays. To

record a Primary or Alternate greeting, see
Alternate greeting (up to 60 seconds):" on page
53
Navigation key to highlight the Primary, Alternate, or
"To record either a Primary or
54.