Cf_Backgnd Command; Cf_Disp Command - Sanyo PDG-DXL2000 - 2000 Lumens Specifications

PDG-DXL2000 Expand Serial Command Functional Specifications

8.10.11 CF_BACKGND Command

Command "CF_BACKGND_%1" [CR]
"BLUE" -------------------- Select Blue Back
"USER" ------------------- Select User
"BLACK" ------------------ Select Black Back
%1
"UP" ---------- The same operation as pressing Up key or Left key
"DN" ---------- The same operation as pressing Down key or Right key
Set Screen status for no signal.(Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and the setting remains
even after the power is turned to ALL OFF status.
Details
*When ÿ
Capture non-practice.
Acceptable
Response
Unacceptable

8.10.12 CF_DISP Command

Command "CF_DISP_%1"[CR]
"ON" ----------------------------- Select Display
"OFF" --------------------------- Cancel Display
%1
"CNTDWNOFF" -------------- Count down OFF
"UP" --------------- The same operation as pressing Up key or Left key
"DN" ---------------The same operation as pressing Down key or Right key
Set / Cancel Display
The value set by this command is stored in EEPROM and its setting is effective
Details
even after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
1="USER" is received, error code "101" is returned, in the case of
"000" [CR]
"Error Code" [CR]
"000"[CR]
"Error Code"[CR]
37/72