Cf_Input_%1_%2 Command; Cf_System Command - Sanyo PDG-DXL2000 - 2000 Lumens Specifications

PDG-DXL2000 Expand Serial Command Functional Specifications
8.6.8

CF_INPUT_%1_%2 Command

Command "CF_INPUT_%1_%2"[CR]
"COMPUTER1" ------ Select Computer1 Input
"COMPUTER2" ------ Select Computer2 Input
%1 "HDMI" ------------------ Select HDMI Input
"VIDEO" ---------------- Select Video Input
"S-VIDEO" ------------- Select S-video Input
When %1 is COMPUTER1
ANALOG" ------ Select Analog RGB Input
"YPBPR" -------- Select Component Input
"SCART" -------- Select SCART Input
When %1 is COMPUTER2
"ANALOG" ----- Select Analog RGB Input
%2
When %1 is HDMI
"HDMI" ---------- Select HDMI Input
When %1 is VIDEO
"VIDEO" --------- Select Video Input
When %1 is S- VIDEO
"S-VIDEO" ------ Select S-Video Input
Select Input specified by %1 and also Source specified in %2
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
8.6.9

CF_SYSTEM Command

Command "CF_SYSTEM_%1"[CR]
Input is
%1
Computer
Select System of currently selected Input
When SYstem specified by %1 is inappropriate for selected Input, the projector
Details
returns "101"[CR] and the command is not executed
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"VGA1" ------------- Select VGA1
:
"XGA1" ------------- Select XGA1
:
"WXGA3" ------------ Select WXGA3
"1080I" --------------- Select 1080I
"720P" ---------------- Select 720P
"575P" ---------------- Select 575P
"480P" ---------------- Select 480P
"575I" ----------------- Select 575I
"480I" ----------------- Select 480I
"MODE1"~ "MODE10"------------- Select Mode 1~Mode 10
"000"[CR]
"Error Code"[CR]
26/72