PDG-DXL2000 Expand Serial Command Functional Specifications
8.10.7 CF_3DSYNC Command
Command
"CF_3DSYNC_%1"[CR]
"1" ------------------- Select 1
%1
"2" ------------------ Select 2
Setup 3D Sync.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.8 CF_3DSIDE2D Command
"CF_3DSIDE2D _%1"[CR]
Command
"ON" ------------------- Select ON
%1
"OFF" ------------------ Select OFF
Setup 3D ! '
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.9
CF_3DPHASE Command
Command
"CF_3DPHASE _%1"[CR]
"000-031" ------------------------ Directly select 3D phase setting value
%1
"UP" ------------------------------- Current 3D Phase setting value + 1
"DN" ------------------------------- Current 3D phase setting value – 1
Setup 3D phase setting value.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.10 CF_ZOOM Command
Command
"CF_ZOOM_%1"[CR]
"RST" -------------------- Set Zoom store mode to Reset
%1
"STR1" ------------------- Set Zoom store mode to Store1
"STR2" ------------------- Set Zoom store mode to Store2
Select Zoom store mode.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
2D.
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
36/72