Cr_Syslist Command; Cr_Modelist Command - Sanyo PDG-DXL2000 - 2000 Lumens Specifications

PDG-DXL2000 Expand Serial Command Functional Specifications
9.7.9

CR_SYSLIST Command

Command "CR_SYSLIST"[CR]
Details Get selectable System titles
Acceptable
Response
%1
Unacceptable

9.7.10 CR_MODELIST Command

Command "CR_MODELIST"[CR]
Details Get selectable Mode titles
Acceptable
%1
%2
Response
%x
Unacceptable
"000_%1_%2_..._%x" [CR]
- When Input is PC-Analog
"XGA1" ------------ XGA1is selectable
"1080I " ----------- 1080i is selectable
Projector does not return Auto, Mode 1-10
When there is no signal, it returns Error Code "101"
- When Input is HDMI
"D-XGA" ---------- D- XGA1is selectable
"D-720P" --------- D-720P is selectable
When there is no signal, projector returns Error Code "101"
-When Input is Y,Pb/Cb,Pr/Cr
Projector return Error Code "101".
-When Input is Video, S-Video
Projector return Error Code "101".
""Error Code"[CR]
"000_%1_%2_..._%x" [CR]
Returns Error code "101" when Input is other than PC-Analog
Returns Error code "101" when Input is PC-Analog but no signal
When Input is PC-Analog and signal is found, returns selectable
Mode among Mode1 – 10
:
"MODE1"
:
:
"MODE10
"Error Code"[CR]
56/72