1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. PDG-DXL2000 - 2000 Lumens
  6. Specifications

Sanyo PDG-DXL2000 - 2000 Lumens Specifications

Expand serial command functional specifications
Hide thumbs Also See for PDG-DXL2000 - 2000 Lumens:
Table of Contents

Advertisement

Quick Links

Download this manual
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PDG-DXL2000
Ver. 1.00
SANYO Electric Co., Ltd
DS Company
Projector Division

Advertisement

Table of Contents
loading

Related Manuals for Sanyo PDG-DXL2000 - 2000 Lumens

Summary of Contents for Sanyo PDG-DXL2000 - 2000 Lumens

  • Page 1 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PDG-DXL2000 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division...

  • Page 2: Table Of Contents

    PDG-DXL2000 Expand Serial Command Functional Specifications CONTENTS – Overview .........................7 Serial Interface Specification ..................7 2.1 Transfer Specification....................7 2.2 Connection.........................7 Notes for communication....................8 Name Definition ......................8 Functional Execution Command Table................9 Image Command Table...................9 PC Adjust Control Command Table ..............9 Input Control Command Table ................9 Screen Command Table ..................10 Lamp Command Table..................10 Sound Command Table..................10...
  • Page 3 PDG-DXL2000 Expand Serial Command Functional Specifications 8.4.9 CF_PROGV Command ..................19 8.4.10 CF_NZRED Command...................19 8.4.11 CF_IMAGE Command ...................20 8.4.12 CF_IMAGEADJ Command ................20 PC Adjust Control Command ................21 8.5.1 CF_FSYNC Command ...................21 8.5.2 CF_TDOTS Command ...................21 8.5.3 CF_CLAMP Command...................21 8.5.4 CF_H – POS Command .................22 8.5.5 CF_V –...
  • Page 4 PDG-DXL2000 Expand Serial Command Functional Specifications 8.10 Setting Command ....................34 8.10.1 CF_LANG Command ..................34 8.10.2 CF_MENUPOSITION Command ..............34 8.10.3 CF_AUTOSETUPPCADJ Command.............35 8.10.4 CF_INPUTSEARCH Command ..............35 8.10.5 CF_AUTOSETUP Command .................35 8.10.6 CF_3D SET Command...................35 8.10.7 CF_3DSYNC Command.................36 8.10.8 CF_3DSIDE2D Command................36 8.10.9 CF_3DPHASE Command ................36 8.10.10 CF_ZOOM Command .................36...
  • Page 5 PDG-DXL2000 Expand Serial Command Functional Specifications Transfer Example ....................46 Operation Condition .....................46 Image Status Read Command ................47 9.4.1 CR_BRIGHT Command .................47 9.4.2 CR_CONT Command..................47 9.4.3 CR_COLOR Command ..................47 9.4.4 CR_TINT Command ..................47 9.4.5 CR_SHARP Command ..................47 9.4.6 CR_GAMMA Command .................48 9.4.7 CR_WBAL –...
  • Page 6 PDG-DXL2000 Expand Serial Command Functional Specifications 9.8.3 CR_VSCALE Command ................57 9.8.4 CR_VPOS Command..................57 9.8.5 CR_HSCALE Command ................58 9.8.6 CR_HPOS Command..................58 9.8.7 CR_ CEIL Command..................58 9.8.8 CR_ REAR Command..................58 9.8.9 CR_ COLBOARD Command .................58 Lamp Status Read Command ................59 9.9.1 CR_LAMPREPL Command ................59 9.9.2 CR_LAMPH Command ..................59 9.9.3...
  • Page 7 PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.22 CR_SECURITY Command .................66 9.11.23 CR_KEYDIS Command ................66 9.11.24 CR_PJLOCKNOW Command..............67 9.11.25 CR_PJLOCKMENU Command ..............67 9.11.26 CR_FANMODE Command .................67 9.11.27 CR_FANCONTROL Command ..............67 9.11.28 CR_FILH Command ...................67 9.11.29 CR_FILREPL Command ................68 9.11.30 CR_FILTIMER Command................68 9.12 Other Status Read Command ................69 9.12.1 CR_STATUS Command .................69...

  • Page 8: Overview

    PDG-DXL2000 Expand Serial Command Functional Specifications Overview 1.1 This Functional Specification defines communication functions for PDG-DXL2000. 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector remotely from PC by RS-232C. Therefore, the commands are defined as Expand Serial Commands.

  • Page 9: Notes For Communication

    PDG-DXL2000 Expand Serial Command Functional Specifications Notes for communication 1. Expand Serial Command is defined as one command / one line that starts with “C” and ends with carriage return (0x0D) 2. There are two types of commands: Functional Execution Command and Status Read Command.

  • Page 10: Functional Execution Command Table

    PDG-DXL2000 Expand Serial Command Functional Specifications 5. Functional Execution Command Table 5.1 Image Command Table Execute command Item CF_BRIGHT_%1[CR] Set Brightness value CF_CONT_%1[CR] Set Contrast value CF_COLOR_%1[CR] Set Color value CF_TINT_%1[CR] Set Tint value CF_SHARP_%1[CR] Set Sharpness value CF_GAMMA_%1[CR] Set Gamma value CF_WBAL-R_%1[CR] Set White Balance Red value CF_WBAL-G_%1[CR]...

  • Page 11: Screen Command Table

    PDG-DXL2000 Expand Serial Command Functional Specifications 5.4 Screen Command Table Execute command Item CF_SCREEN_%1[CR] Select Screen size CF_DZCENT_%1[CR] Cancel Digital Zoom mode CF_KEYSTONE_%1[CR] Set Keystone CF_KYSTNMODE_%1[CR] Set Keystone Store mode CF_VSCALE_%1[CR] Set value of Vertical scale CF_VPOS_%1[CR] Set value of Vertical position CF_HSCALE_%1[CR] Set value of Horizontal scale CF_HPOS_%1[CR]...

  • Page 12: Other Command Table

    PDG-DXL2000 Expand Serial Command Functional Specifications CF_FDEFAULT_%1[CR] Set the value to Factory Default 5.8 Other Command Table Execute command Item Behave the same as corresponding key of the projector / CF_KEYEMU_%1[CR] remote control. CF_MENU_%1[CR] Switch ON/OFF of each Menu. CF_POWER_%1[CR] Switch ON/OFF of Power.

  • Page 13: Status Read Command Table

    PDG-DXL2000 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command Item CR_BRIGHT[CR] Get Brightness value CR_CONT[CR] Get Contrast value CR_COLOR[CR] Get Color value CR_TINT[CR] Get Tint value CR_SHARP[CR] Get Sharpness value CR_GAMMA[CR] Get Gamma value CR_WBAL-R[CR]...

  • Page 14: Screen Status Read Command Table

    PDG-DXL2000 Expand Serial Command Functional Specifications 6.5 Screen Status Read Command Table Status read command Item CR_SCREEN[CR] Get selected screen size CR_KYSTNMODE[CR] Get setting status of Keystone Store mode CR_VSCALE[CR] Get setting status of Vertical Scale CR_VPOS[CR] Get setting status of Vertical Position CR_HSCALE[CR] Get setting status of Horizontal Scale CR_HPOS[CR]...

  • Page 15: Other Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications CR_FANCONTROL[CR] Get selected Fan Control Mode CR_FILH[CR] Get Filter used time CR_FILREPL[CR] Get the information for Filter replacement time CR_FILTIMER[CR] Get time when Filter warning OSD is displayed 6.9 Other Status Read Command Status read command Item CR_STATUS[CR] Get setting status of Projector behavior...

  • Page 16: Error Code Table

    PDG-DXL2000 Expand Serial Command Functional Specifications 7. Error Code Table Error Code Details -When the received data cannot be decoded -Parameter determination error (digit number error, including invalid value, etc.) When the function selected is not available under current condition. ex) When receiving signal-related commands while no signal is entered Selected value is out of range (Not reflected) Command mismatched to Hardware (command for Optional function...

  • Page 17: Functional Execution Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8. Functional Execution Command 8.1 Format PC issues commands in format as below: Pattern1 : “CF_COMMAND” [CR] Pattern2 : “CF_COMMAND_”%1 [CR] CF_ : Header COMMAND : Character line %1 : Parameter (Character line) _ : Space (To separate COMMAND and Parameter) The projector decodes the received command and when it is ready to receive the next command, it returns the response.

  • Page 18: Image Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_BRIGHT Command Command "CF_BRIGHT_%1”[CR] "000~063” --------------- Directly select Brightness setting value "UP” ----------------------- Current Brightness setting value + 1 "DN” ----------------------- Current Brightness setting value – 1 Set Brightness value of user control The value set by this command will not be saved to projector.

  • Page 19: Cf_Sharp Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command “CF_SHARP_%1”[CR] “000~015” ---------------- Directly select Sharpness setting value “UP” ------------------------ Current Sharpness setting value + 1 “DN” ------------------------ Current Sharpness setting value - 1 Set Sharpness value of user control The value set by this command will not be saved to projector.

  • Page 20: Cf_Coltemp Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command “CF_COLTEMP_%1”[CR] “000” ------ Xlow “001” ------ Low “002” ------ Mid “003” ------ High Set Color Temperature. (Available only in the normal Power ON status) The value set by this command will not be saved to the projector. Therefore, when Details turning into Standby status or ALL is OFF, the value returns to original setting.

  • Page 21: Cf_Image Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.4.11 CF_IMAGE Command Command “CF_IMAGE_%1”[CR] “DYNAMIC” ------ Dynamic (Fixed value to enable projection with a sharp, powerful picture tone) “STAND” ---------- Standard (Image adjust value is set to factory default) “REAL” ------------ Real (Fixed value to display graphic image with natural tone) “CINEMA”...

  • Page 22: Pc Adjust Control Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command 8.5.1 CF_FSYNC Command Command “CF_FSYNC_%1”[CR] “0000~0031” --------------- Directly select Fine Sync setting value “UP” -------------------------- Current Fine Sync setting value + 1 “DN” -------------------------- Current Fine Sync setting value - 1 Set Fine Sync value of PC signal The value set by this command will not be saved to projector.

  • Page 23: Cf_H - Pos Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.5.4 CF_H – POS Command Command “CF_H-POS_%1”[CR] “0000~nnnn” --- Directly select Horizontal Position setting value “nnnn” shows maximum value, it is current Total Dots value - Display Dots value “UP” -------------- Current Horizontal Position setting value + 1 “DN”...

  • Page 24: Cf_Pcmodefree Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.5.7 CF_PCMODEFREE Command Command “CF_PCMODEFREE_%1”[CR] “MODE1” ------ Set Mode1 to Free status “MODE2” ------ Set Mode2 to Free status “MODE3” ------ Set Mode3 to Free status “MODE4” ------ Set Mode4 to Free status “MODE5” ------ Set Mode5 to Free status “MODE6”...

  • Page 25: Input Control Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command “CF_INPUT_%1”[CR] “CONPUTER1” ----- Select Computer1 Input “COMPUTER2” ----- Select Computer2 Input “HDMI” ----------------- Select HDMI Input “VIDEO” --------------- Select Video Input “S-VIDEO” ------------ Select S-video “UP” ----------------------- The same operation as pressing Up key or Left key “DN”...

  • Page 26: Cf_Input1 Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.6.3 CF_INPUT1 Command Command “CF_INPUT1_%1_”[CR] “ANALOG” ---------- Select Analog RGB Input “YPBPR” ------------- Select Component “SCART” ------------- Select SCART Select Input - Computer 1 and source specified in %1 at once. Details This command is available in normal Power ON status. Acceptable “000”[CR] Response...

  • Page 27: Cf_Input_%1_%2 Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.6.8 CF_INPUT_%1_%2 Command Command “CF_INPUT_%1_%2”[CR] “COMPUTER1” ------ Select Computer1 Input “COMPUTER2” ------ Select Computer2 Input “HDMI” ------------------ Select HDMI Input “VIDEO” ---------------- Select Video Input “S-VIDEO” ------------- Select S-video Input When %1 is COMPUTER1 ANALOG”...

  • Page 28: Screen Control Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command “CF_SCREEN_%1”[CR] “NORMAL” -------------------- Select Normal mode “FULL” ------------------------- Select Full screen mode “WIDE” ------------------------- Select Wide mode “ZOOM” ------------------------ Select Zoom mode “TRUE” ------------------------- Select True mode Input is “CUSTOM”...

  • Page 29: Cf_Keystone Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command “CF_KEYSTONE_%1”[CR] “UP” ------------- Correct Keystone distortion to reduce upper part of image “FUP” ----------- Correct Keystone distortion to reduce upper part by 2steps “DN” ------------- Correct Keystone distortion to reduce lower part of image “FDN”...

  • Page 30: Cf_Vpos Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7.6 CF_VPOS Command Command “CF_VPOS_%1”[CR] “015” --------- +15 “014” --------- +14 ÿ “002” --------- +2 “001” --------- +1 “000” --------- +0 “-01” ---------- -1 “-02” ---------- -2 ÿ “-14” ---------- -14 “-15” ---------- -15 “UP”...

  • Page 31: Cf_Hpos Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command “CF_HPOS_%1”[CR] “015” --------- +15 “014” --------- +14 ÿ “002” --------- +2 “001” --------- +1 “000” --------- +0 “-01” ---------- -1 “-02” ---------- -2 ÿ “-14” ---------- -14 “-15” ---------- -15 “UP”...

  • Page 32: Cf_Colboard Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7.11 CF_COLBOARD Command Command “CF_COLBOARD_%1”[CR] “OFF” ------------------------Select OFF “RED” ------------------------Select Red “BLUE” ---------------------- Select Blue “YELLOW” ----------------- Select Yellow “GREEN” ------------------- Select Green “BLACKBOARD” --------- Select Blackboard Select Color of Colorboard mode. Image mode is automatically switched to Colorboard mode by receiving this command.

  • Page 33: Lamp Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command “CF_LAMPH_%1”[CR] “RST” Reset Lamp use time counter. Details This command is available in normal Power ON status. Acceptable “000”[CR] Response Unacceptable “Error Code”[CR] 8.8.2 CF_LAMPMODE Command Command “CF_LAMPMODE_%1”[CR] “NORMAL”...

  • Page 34: Sound Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command Command “CF_VOLUME_%1”[CR] “000-063” -------------------------- Directly select Volume setting value “UP” --------------------------------- Current Volume setting value +1 “DN” --------------------------------- Current Volume setting value -1 Control Volume value The same operation of Volume Up/Down as projector and RC, and directly select Volume setting value.

  • Page 35: Setting Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command “CF_LANG_%1”[CR] “ENG” --------------------------- Select English “DEU” --------------------------- Select German “FRA” --------------------------- Select French “ITA” ----------------------------- Select Italian “ESP” ---------------------------- Select Spanish “POR” --------------------------- Select Portuguese “NED” --------------------------- Select Dutch “SVE”...

  • Page 36: Cf_Autosetuppcadj Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.3 CF_AUTOSETUPPCADJ Command Command “CF_AUTOSETUPPCADJ_%1”[CR] “ON” ------------------- Set Auto PC ADJ. function to ON “OFF” ------------------ Set Auto PC ADJ. function to OFF Set/Cancel Auto PC adj. function This command is available in normal Power ON status. Details Note) It is unable to set both PC ADJ.

  • Page 37: Cf_3Dsync Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.7 CF_3DSYNC Command Command “CF_3DSYNC_%1”[CR] “1” ------------------- Select 1 “2” ------------------ Select 2 Setup 3D Sync. The status set by this command is stored in EEPROM and its setting is effective Details after ALL is OFF. This command is available in normal Power ON status.

  • Page 38: Cf_Backgnd Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.11 CF_BACKGND Command Command “CF_BACKGND_%1” [CR] “BLUE” -------------------- Select Blue Back “USER” ------------------- Select User “BLACK” ------------------ Select Black Back “UP” ---------- The same operation as pressing Up key or Left key “DN” ---------- The same operation as pressing Down key or Right key Set Screen status for no signal.(Available only in the normal Power ON status) The status set by this command is stored in EEPROM and the setting remains even after the power is turned to ALL OFF status.

  • Page 39: Cf_Logo Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.13 CF_LOGO Command Command “CF_LOGO_%1_%2”[CR] “0000”-”9999” ----------------- Set LOGO PIN CODE directly “OFF” ---------------------------- Disable Logo function “DFLT” --------------------------- Display Default Logo “USER” -------------------------- Display Captured Logo “UP” --------------- The same operation as pressing Up key or Left key “DN”...

  • Page 40: Cf_Terminal Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.16 CF_TERMINAL Command Command “CF_TERMINAL_%1”[CR] “COMPUTER” ----------------Set Input mode “MONITOR” ------------------- Set Monitor Out mode Set Terminal setup. This command is available in normal Power ON status. Details Terminal means Computer 2 in this model. Acceptable “000”[CR] Response...

  • Page 41: Cf_On-Sta Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.20 CF_ON-STA Command Command “CF_ONÿ STA_%1”[CR] “ON” --------------------------- Set Direct on active “OFF” ------------------------- Set Direct on inactive “UP” --------------------------- Switch setting (On → Off → On → ÿ e ÿ e ÿ e ) “DN”...

  • Page 42: Cf_Rcode Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.23 CF_RCODE Command Command “CF_RCODE_%1”[CR] "001” --------------------------- Select Code1 "002” --------------------------- Select Code2 “UP” --------------- The same operation as pressing Up key or Left key “DN” --------------The same operation as pressing Down key or Right key Select Code of Remote Control The status set by this command is stored in EEPROM and its setting is effective Details...

  • Page 43: Cf_Fanmode Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.26 CF_FANMODE Command Command “CF_FANMODE_%1”[CR] “L1” ---------------------------- Set Fan Mode to L1 “L2” ---------------------------- Set Fan Mode to L2 Switch Fan Mode When L1 is selected, fan noise after POWER OFF is louder. When L2 is selected, fan noise after POWER OFF becomes quiet. Details However fan rotates longer than L1.

  • Page 44: Cf_Fdefault Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.30 CF_FDEFAULT Command Command “CF_FDEFAULT_%1”[CR] “RST” Set the value to Factory Default Details This command is available in normal Power ON status. Acceptable “000”[CR] Response Unacceptable “Error Code”[CR] 43/72...

  • Page 45: Other Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Command Command “CF_KEYENU_%1”[CR] “RIGHT” ------------------------- Shift Pointer on OSD Menu to right “LEFT” --------------------------- Shift Pointer on OSD Menu to left “UP” ------------------------------ Shift Pointer on OSD Menu to right “DN”...

  • Page 46: Cf_Freeze Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 8.11.4 CF_FREEZE Command Command “CF_FREEZE_%1”[CR] “ON” ------------------------ Set Freeze to ON “OFF” ----------------------- Set Freeze to OFF “UP” ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e ) “DN”...

  • Page 47: Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9. Status Read Command 9.1 Format PC issues commands in format as below: “CR_Command” [CR] Command: Character Line When projector receives the appropriate command, it returns a character line as the required data “000ÿ ? ”%1 [CR] %1: Required Data (Character Line.

  • Page 48: Image Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.4 Image Status Read Command 9.4.1 CR_BRIGHT Command Command “CR_BRIGHT”[CR] Details Get Brightness value of user control Acceptable “000_ÿ ÿ A ”[CR] Response “000”~“063” Unacceptable “Error code”[CR] 9.4.2 CR_CONT Command Command “CR_CONT”[CR] Details Get Contrast value of user control Acceptable “000_ÿ...

  • Page 49: Cr_Gamma Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.4.6 CR_GAMMA Command Command "CR_GAMMA”[CR] Details Get Gamma value of user control Acceptable “000_%a”[CR] “DFLT” -------------------------- Default is selected. “18” ------------------------------ 1.8 is selected. “20” ------------------------------ 2.0 is selected. Response “22” ------------------------------ 2.2 is selected. “24”...

  • Page 50: Cr_Nzred Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.4.11 CR_NZRED Command Command “CR_NZRED”[CR] Details Get setting status of Noise Reduction Acceptable “000_%1”[CR] “L1” -------- Noise Reduction for moving image Response “L2” -------- Noise Reduction for still image “OFF” ----- Noise Reduction is OFF Unacceptable “Error code”[CR] 9.4.12 CR_PROGV Command...

  • Page 51: Pc Adjust Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC”[CR] Details Get Fine Sync value Acceptable “000_%a”[CR] Response “0000”~“0031” Unacceptable “Error Code”[CR] 9.5.2 CR_TDOTS Command Command “CR_TDOTS”[CR] Details Get Total Dots value Acceptable “000_%a”[CR] “nnnn”~“mmmm”...

  • Page 52: Cr_Pcstore Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.5.6 CR_PCSTORE Command Command “CR_PCSTORE”[CR] Get Free/Stored status of MODE1 – MODE10 for PC Adjust Details The data consists of 10 bytes and each byte indicates the status of MODE1 ~ MODE10 respectively. (F:Free S:Stored) Acceptable “000_%a”[CR] “FFFFFFFFFF”...

  • Page 53: Video Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command “CR_SERSYS”[CR] Get currently selected signal Details Returns auto-detected signal in Auto mode Only available for Video input. (N/A when Input is computer) Acceptable “000_%1”[CR] “1080P60” -------------- 1080p 60Hz “1080P50”...

  • Page 54: Input Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT Command Command “CR_INPUT”[CR] Details Get selected INPUT No. Acceptable “000_%1”[CR] Response Request data “1”-”5” Unacceptable “Error code”[CR] 9.7.2 CR_SOURCE Command Command “CR_SOURCE”[CR] Details Get selected Source Acceptable “000_%1”[CR] “ANALOG”...

  • Page 55: Cr_Srcinp4 Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.7.6 CR_SRCINP4 Command Command "CR_SRCINP4” [CR] Details Get selected source of Input 4_Video Acceptable “000_%1”[CR] Response Request data “VIDEO” ------------- Composite Video Input is selected Unacceptable “Error code”[CR] 9.7.7 CR_SRCINP5 Command Command "CR_SRCINP5” [CR] Details Get selected source of Input 5_S-video Acceptable...

  • Page 56: Cr_System Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.7.8 CR_SYSTEM Command Command “CR_SYSTEM”[CR] Details Get selected System Acceptable “000_%1”[CR] “VGA1” -------------- VGA1 is selected “VGA2” -------------- VGA2 is selected ÿ “XGA1”-------------- XGA1 is selected ÿ “WXGA3” --------- WXGA3 is selected “1080i” ------------ 1080i is selected “720p”...

  • Page 57: Cr_Syslist Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.7.9 CR_SYSLIST Command Command “CR_SYSLIST”[CR] Details Get selectable System titles Acceptable “000_%1_%2_..._%x” [CR] - When Input is PC-Analog “XGA1” ------------ XGA1is selectable “1080I ” ----------- 1080i is selectable Projector does not return Auto, Mode 1-10 When there is no signal, it returns Error Code “101”...

  • Page 58: Screen Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 9.8.1 CR_SCREEN Command Command “CR_SCREEN”[CR] Details Get selected on-screen image size Acceptable “000_%a”[CR] “NORMAL” --------------- Normal mode is selected “FULL” --------------------- Full mode is selected “WIDE” --------------------- Wide(16:9) mode is selected Input “ZOOM”...

  • Page 59: Cr_Hscale Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.8.5 CR_HSCALE Command Command “CR_HSCALE”[CR] Details Get setting status of Horizontal Scale Store Mode Acceptable “000_%1”[CR] Response “-32” ~ “032” Unacceptable “Error code”[CR] 9.8.6 CR_HPOS Command Command “CR_HPOS”[CR] Details Get setting status of Horizontal Position Store Mode Acceptable “000_%1”[CR] Response...

  • Page 60: Lamp Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command “CR_LAMPREPL”[CR] Details Get information of Lamp Replacement time Acceptable “000_%1”[CR] “1Y” -------------------------- Over lamp replacement time “1N” -------------------------- Within lamp replacement time “1” means the number of lamps. Response (1 lamp model→...

  • Page 61: Cr_Lampmsts Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.9.5 CR_LAMPMSTS Command Command “CR_LAMPSTS”[CR] Details Get Lighting status of lamp Acceptable “000_%1”[CR] “ÿ N **** ” A number of * should be among 1-4. First character shows how many lamps are incorporated in projector.

  • Page 62: Sound Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command “CR_VOLUME”[CR] Details Get Volume value of user control Acceptable “000_%a”[CR] Response “000”~“063” Unacceptable “Error code”[CR] 9.10.2 CR_MUTE Command Command “CR_MUTE”[CR] Details Get sound mute setting status Acceptable “000_%a”[CR] “ON”...

  • Page 63: Setting Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_LANG Command Command “CR_LANG”[CR] Details Get selected language Acceptable “000_%a”[CR] “ENG” --------------------------- Select English “DEU” --------------------------- Select German “FRA” --------------------------- Select French “ITA” ----------------------------- Select Italian “ESP” ---------------------------- Select Spanish “POR”...

  • Page 64: Cr_Ÿ Dset Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.4 CR_ÿ DSET Command Command “CR_3DSET”[CR] Details Get setting status of 3D function Acceptable “000_%a”[CR] “ON” --------------------- On is selected Response “OFF” ---------------------Off is selected “NVIDIA”------------------NVIDIA 3D VISION is selected Unacceptable “Error Code”[CR] 9.11.5 CR_3DSYNC Command Command “CR_3DSYNC”[CR] Details...

  • Page 65: Cr_Backgnd Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.9 CR_BACKGND Command Command “CR_BACKGND” [CR] Details Get setting status of Screen for no signal Acceptable “000_%1” [CR] “BLUE” -------------------------------- Blue Back is selected Response “USER” ------------------------------- User is selected “BLACK” ------------------------------ Black Back is selected Unacceptable “Error Code”...

  • Page 66: Cr_Terminal Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.14 CR_TERMINAL Command Command “CR_TERMINAL” [CR] Details Get setting status of Terminal Acceptable “000_%1”[CR] “COMPUTER”-------------Computer Input mode Response “MONITOR”----------------Monitor Out mode Unacceptable “?”[CR] 9.11.15 CR_STANDBYMODE Command Command “CR_STANDBYMODE” [CR] Details Get Standby Mode setting status Acceptable “000_%a”[CR] “ECO”...

  • Page 67: Cr_Ccaptiondisp Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.19 CR_CCAPTIONDISP Command Command “CR_CCAPTIONDISP”[CR] Details Get selected channel of Closed caption Acceptable “000_%a”[CR] “OFF” --------- Off “CC1” --------- CC1 is selected Response ÿ a “CC2” --------- CC2 is selected “CC3” --------- CC3 is selected “CC4”...

  • Page 68: Cr_Pjlocknow Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.24 CR_PJLOCKNOW Command Command “CR_PJLOCKNOW” [CR] Details Get if PJ lock is actually in operation Acceptable “000_%1[CR] “LOCK” ------------- PJ Lock is in operation. PJ Lock status is ON-1 or ON-2 on Menu, and PJ PIN CODE is not entered so that projector is actually locked.

  • Page 69: Cr_Filrepl Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.29 CR_FILREPL Command Command “CR_FILREPL”[CR] Details Get the information of Filter replacement time Acceptable “000_%1”[CR] “1Y” ------------------- Over filter replacement time Response “1N” ------------------ Within filter replacement time Unacceptable “Error Code”[CR] 9.11.30 CR_FILTIMER Command Command “CR_FILTIMER”...

  • Page 70: Other Status Read Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command “CR_STATUS”(CR) Get status of Projector behavior. Details This command affects the same as ”CR0” of Basic Serial command, but this has an error code. Acceptable “000_%1”[CR] “00”= Power ON “80”= Stand by...

  • Page 71: Cr_ Ptimer Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.12.5 CR_ PTIMER Command Command “CR_ PTIMER”[CR] Details Get setting status of Presentation timer Acceptable “000_%a”[CR] “ON” ---------------------- Presentation timer is active Response “STOP” ------------------- Presentation timer is pause “OFF” --------------------- Presentation timer is inactive Unacceptable “Error code”[CR] 9.12.6 CR_TEMPWARN Command...

  • Page 72: Cr_Temp Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.12.7 CR_TEMP Command Command "CR_TEMP”[CR] Get current temperature inside a projector. Details If there are several sensors installed, it is possible to get information from all the sensors at once. Acceptable “000_%1_%2_%3”[CR] %1= Sensor 1 temperature (Outside temperature) %2= Sensor 2 temperature (Inside temperature1) %3= Sensor 3 temperature (Inside temperature2) %1,%2 are consists of 6 bites fixed...

  • Page 73: Cr_Tempfail Command

    PDG-DXL2000 Expand Serial Command Functional Specifications 9.12.8 CR_TEMPFAIL Command Command "CR_TEMPFAIL”[CR] Get the temperature inside a projector when abnormal temperature occurs. Details If there are several sensors installed, it is possible to get information from all the sensors at once. Acceptable “000_%a_%b_%c”[CR] %a ------------------ Sensor 1 temp.

Table of Contents